Recover cutting fluid
Separate and return reusable fluid while reducing loss and wastewater-treatment load.
Aluminum chips from CNC machining, sawing, automotive parts, 3C products and profile processing often contain cutting fluid, oil, moisture and debris. Chouno provides an integrated route that reduces manual handling and improves chip cleanliness, transport efficiency and downstream value.
Typical system scope
Collect
Centralized hoppers and conveyors.
Centralized hoppers and conveyors.
Shred
Reduce tangled chips and offcuts.
Reduce tangled chips and offcuts.
De-oil
Centrifugal separation and fluid recovery.
Centrifugal separation and fluid recovery.
Dry
Reduce residual moisture and oil.
Reduce residual moisture and oil.
Convey
Transfer consistent feed downstream.
Transfer consistent feed downstream.
Improve chip value
Cleaner, drier chips are easier to transport and prepare for briquetting or remelting.
Automate handling
Connect multiple machining points to centralized recycling equipment and downstream storage.
Published capability context: Chouno's centrifugal-dehydration-machine information states a maximum throughput of approximately 6 tonnes per hour, with post-dehydration moisture typically around 1% and up to 2%. Actual results depend on chip geometry, feed condition, fluid type and operating settings.
Typical industries
Automotive components
Machining and wheel-manufacturing chips with cutting fluid.
3C and electronics
High-volume aluminum machining waste from consumer-electronics production.
Aluminum processing
Profile plants, foundries and secondary-aluminum recyclers.
Information needed for configuration
Provide material photos, chip geometry, oil and moisture condition, machine count, daily volume, available floor space and downstream route. Chouno can evaluate a centralized or point-of-use system.
| Material | Chip type, photos, typical dimensions, bulk density and foreign material. |
|---|---|
| Fluid condition | Oil/coolant type, inlet moisture, recovery or wastewater objective. |
| Production basis | Machine count, hourly and daily chip volume, shifts and peak variation. |
| Downstream route | Storage, briquetting, furnace type, conveying distance and elevation. |
| Plant interfaces | Layout, power, controls, maintenance access and environmental requirements. |
Frequently asked questions
Which aluminum chips can the line process?
The system can be evaluated for loose, tangled or short aluminum chips from CNC machining, sawing, automotive, wheel, profile and electronics production.
Can cutting fluid be recovered?
Centrifugal separation can recover part of the cutting fluid for treatment or reuse, depending on fluid condition and plant requirements.
Is briquetting included?
Briquetting can be evaluated as a downstream option. The required route depends on chip condition, logistics and the selected remelting process.
Discuss your aluminum chip project
Send material photos, fluid condition, daily volume and the downstream route. Chouno will identify the remaining data needed for a process proposal.
Email: Chounoks@163.com · Phone: +86 180 5112 9563